A tool to print for fusion 360
When you want to reproduce an object with fusion 360 you often use a behind -the -scenes, a ruler or a rapporteur, but, when you want to reproduce rounded off thanks to a leave, it is not obvious.
People have thought of that and carry out tools to print, I present to you one that I tested:
Version with the shelves 1 to 20 mm: [https://makerworld.com/fr/models/149224#profileid-162798oquer(https://makerworld.com/fr/models/149224#Profileid-162798)
Version with rays from 21 to 40 mm: [https://makerworld.com/fr/models/592270#profileid-513925oquer(https://makerworld.com/fr/models/592270#Profileid-513925)
To test this tool, I will make a box for the box of my AirPods Pro, the concern is that the 4 angles of it are rounded.
After several try, it is determined that the radius of the rounding is 15 mm.
We only have to take some measures from the case.
If you want to test this box, it is on Makerworld: [https://makerworld.com/fr/models/918207#Profileid-880024quoquer(https://makerworld.com/fr/models/918207#Profileid-880024)
Good modeling and good impression.