D3D active heating
Room heating to boost your 3D prints!
This room heating compatible with several 3D printers, including bambu LAB X1, X1C, M and P1S, seems to be an interesting option to improve the print quality of certain technical filaments.
The package
Improvement of print quality
Taking a constant temperature in the printing chamber, this device reduces deformations and improves adhesion between layers when using high temperature filaments such as PC, PA-CF and PPS.
Precise temperature control
With a maximum temperature of 65 ° C and a Sinilink application for remote control, you can adjust the temperature according to the specific needs of each filament.
Extended compatibility
In addition to the Bambu Lab printers, this heating is compatible with other popular models such as Voron Trident and Creality K1.
Robust design
The shell is printed in Bambu Lab ABS-GF, which ensures good sustainability.
D3D heating
Important points to take into account
Watch out for low -temperature filaments, it is not recommended to use this heating with filaments such as PLA, PETG and TPU, because the heat could soften them and cause jams.
facility
In 30 minutes, carry out in a 1st step to remove the rear plate from the printer, this in order to access the supply of it.
(Do not forget to disconnect the printer âșïž)
The back of the X1C
Then pass the power cable of the housing from inside the printer to the bottom (there is a small already existing hole, that said I widen it a little)
Positioning
Then itâs time to connect the heating to the power supply, there are no polarities to respect.
The wires passing under the printer I have fixed it with a glue gun, and those who are at the back of the printer I used the Serflex.
Food
Once the cables are fixed and secure, connect to the power, you can test, if everything is ok then there is only to go up everything, fix the heating with the wedges provided.
The application
Go to the Play Store to download the app, you will need to be created.
TĂ©lĂ©chargerNow that itâs done, you can control your housing remotely, it allows you to put a timer, a minimum and maximum temperature etc.
In summary, this room heating is a useful accessory for 3D printers who want to improve the print quality of demanding and sensitive to warping.
If this product interests you, leave a message to the seller saying that you order from le-blab.fr, it will put a small gift with your order đ„°
Commander